U‑shaped high‑performance clamp SGU
Order number | Opening | Throat depth | Clamping depth | Clamping depth | Rail | Weight |
mm | mm | mm | mm | mm | kg | |
---|---|---|---|---|---|---|
SGU30-14-10
|
300 | 140 | 100 | 130 | 30x15 | 3.75 |
Extremely sturdy
The U-shaped fixed arm is produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness.
Special tilting pressure plate
The heat-resistant pressure plate (SGU/STBU) is replaceable and can be tilted up to 35° so it can even clamp on angled or sloping surfaces. It has an extremely long service-life due to the oil-soaked sintered steel insert's excellent sliding and emergency running properties.
Forged sliding arm
The sliding arm is made from forged tempered steel, and can withstand extremely large loads. You can be sure of that.
Tempered spindle
The tempered spindle is particularly sturdy and wear-resistant. This considerably increases its durability.
Sturdy tommy bar
The sturdy tommy bar has special rounded hand-friendly ends, as well as a hexagonal bolt. This allows powerful, controlled clamping.
- Metal construction
- Locksmith work
- Step-over clamping
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Fixed and sliding bracket made of tempered steel, galvanised
- Spindle with trapezoidal thread in tempered, rolled steel, phosphated
- Toggle made of steel, galvanised
- Pressure plate made of steel, phosphated
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean and oil the spindle regularly
- If the rail is shiny, roughen both narrow sides with emery cloth (100 grain)
- Clean and oil the pressure plate regularly