Horizontal toggle clamp with open arm and horizontal base plate STC‑HH
Product details
- In the clamped position, the lever is horizontal
- Automatic and infinitely variable adjustment of the clamping height up to 35 mm while clamping force remains unchanged – without having to make manual changes to the position of the pressure screws
- Clamping force is variable up to 2,500 N depending on the adjustment of the set screw in the cantilevered joint
- Sturdy, tempered metal sheets for a long service life
- Hole pattern on the base plate designed to facilitate fast and secure clamping set-up for metric and imperial
- High-quality oil resistant two-component plastic handle
| Order number | Opening | Automatic adjustment | Clamping force | Weight |
| mm | mm | N | kg | |
|---|---|---|---|---|
|
STC-HH20
|
35 | 20 | 1100 | 0.2 |
|
STC-HH20SB
|
35 | 20 | 1100 | 0.2 |
|
STC-HH50
|
40 | 35 | 2500 | 0.38 |
|
STC-HH50SB
|
40 | 35 | 2500 | 0.38 |
|
STC-HH70
|
60 | 35 | 2500 | 0.42 |
|
STC-HH70SB
|
60 | 35 | 2500 | 0.42 |
3D CAD data at "http://bessey.partcommunity.com", "https://www.traceparts.com" and in the download area of the BESSEY website
Ready to go – the first time and for quick set-up during workpiece changes
BESSEY STC toggle clamps adapt to workpieces of varying thickness – without manual setting of the spindle and, with practically the same clamping force:
- due to an automatic clamping width range
Uncompromisingly versatile
One size of the BESSEY toggle clamp replaces multiple competitor sizes simultaneously:
- due to an extremely large clamping range, thanks to the patented mechanism
Powerful and gentle
Even sensitive workpieces, e.g. with veneered or varnished surfaces, can be gently clamped:
- due to moving pressure plate with removable protective cap
- due to clamping force regulation via adjustment screw in the joint
- Interior fittings
- DIY
- Furniture and joinery works
- Secure quickly with self-adjusting clamping width
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Sheet metal parts made of tempered steel, nickel-plated
- Spindle made of steel, galvanised
- Handle made of 2-component plastic
- Protective caps made of plastic
- Clean the rails with solvent
- Clean and oil the spindle regularly
