Seaming tool PS130, big and strong
Order number | Opening | Length | Width | Weight |
mm | mm | mm | kg | |
---|---|---|---|---|
PS130
|
5-130 | 715 | 215 | 4.08 |
Vacuum pumps with control function
The required vacuum is generated with only a few movements of the pump – for a maximum vacuum and top clamping force up to 1,200 N. The status of the vacuum can be checked at any time via a marking ring on the pump tappet and brought back up to the maximum by repeated pumping.
Release button
By simply pressing the release button, the vacuum disappears and the seaming tool can be removed quickly.
Quick adjusting screw
To quickly adjust the distance, simply undo the screws and slide the suction cups into the desired position via the guide rails.
Sturdy construction
The proven BESSEY all-steel rails, which run in anodised aluminium profiles, keep the suction discs on precisely the same level, even under high clamping pressures. This guarantees a precise finished result.
- Interior fittings
- Furniture and joinery works
- Kitchen construction and shop fitting
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Base body aluminium, anodised
- Rail made of galvanised steel
- Spindle with trapezoidal thread in rolled steel, galvanised
- Handle made of 2-component plastic
- Remaining parts made of plastic
- Clean the rails with solvent
- Clean and oil the spindle regularly
- Clean rubber plates with clear water if necessary (keep free of dust)