Lightweight parallel clamp UK UniKlamp
Product details
- Clamping force up to 1,500 N
- Parallel jaw faces with extra-large contact surfaces
- Clamping of various shapes, along the whole length of the rail
- Universally applicable
- Light and easy-to-handle
- No need for tools for switching between clamping and spreading
- On carded hang pack
= Show Spareparts
| Order number | Opening | Throat depth | Spreading width | Rail | Weight |
| mm | mm | mm | mm | kg | |
|---|---|---|---|---|---|
|
UK16
|
160 | 80 | 172-270 | 20x5 | 0.62 |
|
UK30
|
300 | 80 | 172-415 | 20x5 | 0.72 |
|
UK60
|
600 | 80 | 172-720 | 20x5 | 0.93 |
|
UK80
|
800 | 80 | 172-920 | 20x5 | 1.05 |
|
UK100
|
1000 | 80 | 172-1120 | 20x5 | 1.25 |
Parallel jaw faces
The large, flat jaw faces made from impact‐ and fracture‐resistant reinforced polyamide are almost parallel. For gentle clamping of a very wide range of different shapes over the entire length of the rail, without spacers.
High‐quality profiled rail
The BESSEY hollow profile rail from our own drawing plant has been especially optimised for clamps. The profile acts as a reliable reinforcement against torsional forces, while the serration prevents the clamp from slipping.
Removable end stop
The end stop made from impact-resistant polyamide also gives the clamp added support. It can be removed without any tools, to allow the lower arm to be quickly turned around and used for spreading.
- Interior fittings
- DIY
- Furniture and joinery works
- Large-area clamping and spreading
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Upper and lower section made of reinforced PA6 plastic with inserted sheet metal parts for reinforcement
- Hollow profile rail made of steel, cold-drawn, galvanised
- Spindle with trapezoidal thread in rolled steel, burnished
- Handle made of wood, water-based paint
- Pressure plate made of steel, cold pressed, galvanised
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean the fluting on the rails with a steel brush
- Clean and oil the spindle regularly
