One‑handed clamp EZ
Order number | Opening | Throat depth | Spreading width | Rail | Clamping force | Content | Weight |
mm | mm | mm | mm | N | kg | ||
---|---|---|---|---|---|---|---|
EZS11-4SET
|
110 | 40 | 80-190 | 7x2,5 | 200 | 2 x EZS11-4 | 0.12 |
EZM15-6
|
150 | 60 | 125-270 | 14x5 | 750 | – | 0.31 |
EZM30-6
|
300 | 60 | 125-420 | 14x5 | 750 | – | 0.38 |
EZL15-8
|
150 | 80 | 160-300 | 18x5 | 1400 | – | 0.58 |
EZL30-8
|
300 | 80 | 160-450 | 18x5 | 1400 | – | 0.68 |
EZL45-8
|
450 | 80 | 160-500 | 18x5 | 1400 | – | 0.77 |
EZL60-8
|
600 | 80 | 160-750 | 18x5 | 1400 | – | 0.86 |
EZXL30-9
|
300 | 90 | 195-790 | 22x8 | 2700 | – | 1.24 |
EZXL60-9
|
600 | 90 | 195-790 | 22x8 | 2700 | – | 1.57 |
EZXL90-9
|
900 | 90 | 195-1090 | 22x8 | 2700 | – | 1.9 |
Multiple applications
The one-handed EZ range offers numerous possible applications:
- due to a diverse range in four sizes with clamping widths from 110 to 900 mm and clamping forces from 200 N to 2,700 N
- due to the cross prism integrated in the plastic protective caps for the secure fastening of round, pointed and angular pieces
- due to conversion of the top section from clamping to spreading – with sizes EZM, EZL and EZXL tool-free thanks to release mechanism at the touch of a button
Practical convenience
The entire range offers ergonomic handling, thanks to sophisticated technology:
- due to the high quality 2-component plastic handle with pump lever behind the rail for safe access from both directions
- due to the release handle integrated in the grip for quick adjustment of the sliding bar and for releasing the clamp
Robust design
Modern aesthetics meet with longevity here:
- due to the use of high-quality materials, such as fibreglass-reinforced polyamide for the top and bottom, as well as hardened, tempered, and burnished steel for the profiled rails
- due to the plastic housing, the grip mechanism is protected from dust and chips
- Interior fittings
- DIY
- Furniture and joinery works
- Staircase construction
- Dry construction
- Kitchen construction and shop fitting
- One-handed clamping and spreading
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Rail made of hardened steel, burnished
- Lever made of reinforced PA6 plastic
- Upper and lower section made of reinforced PA6 plastic
- Protective caps made of plastic
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents