Malleable cast iron screw clamp TPN with tried‐and‐true wooden handle
Order number | Opening | Throat depth | Rail | Weight |
mm | mm | mm | kg | |
---|---|---|---|---|
TPN10BE
|
100 | 50 | 15x5 | 0.26 |
TPN15B5BE
|
150 | 50 | 15x5 | 0.29 |
TPN20B5BE
|
200 | 50 | 15x5 | 0.31 |
TPN12BE
|
120 | 60 | 20x5 | 0.4 |
TPN20B6BE
|
200 | 60 | 20x5 | 0.45 |
TPN16BE
|
160 | 80 | 25x6 | 0.73 |
TPN20B8BE
|
200 | 80 | 25x6 | 0.77 |
TPN25B8BE
|
250 | 80 | 25x6 | 0.82 |
TPN30B8BE
|
300 | 80 | 25x6 | 0.87 |
TPN20BE
|
200 | 100 | 27x7 | 1.16 |
TPN25S10BE
|
250 | 100 | 27x7 | 1.23 |
TPN30S10BE
|
300 | 100 | 27x7 | 1.29 |
TPN40S10BE
|
400 | 100 | 27x7 | 1.41 |
TPN25BE
|
250 | 120 | 29x9 | 1.49 |
TPN30S12BE
|
300 | 120 | 29x9 | 1.58 |
TPN40S12BE
|
400 | 120 | 29x9 | 1.75 |
TPN50S12BE
|
500 | 120 | 29x9 | 1.92 |
TPN60S12BE
|
600 | 120 | 29x9 | 2.07 |
TPN80S12BE
|
800 | 120 | 29x9 | 2.45 |
TP100S12BE
|
1000 | 120 | 29x9 | 2.78 |
TP125S12BE
|
1250 | 120 | 29x9 | 3.2 |
TP150S12BE
|
1500 | 120 | 29x9 | 3.66 |
TPN30BE
|
300 | 140 | 32x10 | 2.03 |
TPN40S14BE
|
400 | 140 | 32x10 | 2.3 |
TPN50S14BE
|
500 | 140 | 32x10 | 2.48 |
TPN60S14BE
|
600 | 140 | 32x10 | 2.66 |
TPN80S14BE
|
800 | 140 | 32x10 | 3.12 |
TP100S14BE
|
1000 | 140 | 32x10 | 3.59 |
TP150S14BE
|
1500 | 140 | 32x10 | 4.68 |
TP200S14BE
|
2000 | 140 | 32x10 | 5.74 |
TPN40BE
|
400 | 175 | 32x10 | 2.58 |
TPN60S17BE
|
600 | 175 | 32x10 | 3.02 |
TPN80S17BE
|
800 | 175 | 32x10 | 3.44 |
TP100S17BE
|
1000 | 175 | 32x10 | 3.85 |
- Interior fittings
- Shell construction
- DIY
- Furniture and joinery works
- Kitchen construction and shop fitting
- Carpentry and woodwork
- Powerful and rigid clamping
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Upper and lower section made of reinforced malleable cast iron, powder-coated
- Hollow profile rail made of steel, cold-drawn, galvanised
- Spindle with trapezoidal thread in rolled steel, burnished
- Handle made of wood, water-based paint
- Pressure plate made of steel, cold pressed, galvanised
- Protective caps made of plastic
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean the fluting on the rails with a steel brush
- Clean and oil the spindle regularly
- If the lower part slips, turn the grub screw a 1/4 turn further (TG, KRE, KREV only)
- Clean and oil the pressure plate regularly