Malleable cast iron screw clamp TGRC with tried‐and‐true wooden handle

Product details
  • Clamping force up to 5,500 N
  • Ergonomically shaped wood handle
  • With protective caps on the clamping surfaces
  • Stable solid flat rail with serration
wood
Order number Opening Throat depth Rail Weight
mm mm mm kg
TGRC10
100 50 15x5 0.26
TGRC15B5
150 50 15x5 0.29
TGRC20B5
200 50 15x5 0.31
TGRC12
120 60 20x5 0.42
TGRC20B6
200 60 20x5 0.49
TGRC30B6
300 60 20x5 0.56
TGRC16
160 80 25x6 0.73
TGRC20B8
200 80 25x6 0.77
TGRC25B8
250 80 25x6 0.82
TGRC30B8
300 80 25x6 0.87
TGRC20
200 100 27x7 1.19
TGRC25S10
250 100 27x7 1.28
TGRC30S10
300 100 27x7 1.33
TGRC40S10
400 100 27x7 1.43
TGRC25
250 120 29x9 1.54
TGRC30S12
300 120 29x9 1.63
TGRC40S12
400 120 29x9 1.8
TGRC50S12
500 120 29x9 2.05
TGRC60S12
600 120 29x9 2.24
TGRC80S12
800 120 29x9 2.62
TGRC100S12
1000 120 29x9 2.85
TGRC30
300 140 32x10 2.1
TGRC40S14
400 140 32x10 2.4
TGRC50S14
500 140 32x10 2.24
TGRC60S14
600 140 32x10 2.9
TGRC80S14
800 140 32x10 3.38
TGRC100S14
1000 140 32x10 3.78
TGRC150S14
1500 140 32x10 5.02
TGRC40
400 175 32x10 2.66
TGRC50S17
500 175 32x10 2.93
TGRC60S17
600 175 32x10 3.16
TGRC80S17
800 175 32x10 3.5
TGRC100S17
1000 175 32x10 4
  • Interior fittings
  • Shell construction
  • DIY
  • Furniture and joinery works
  • Kitchen construction and shop fitting
  • Carpentry and woodwork
  • Powerful and rigid clamping
  • Clamping tools are not suitable for lifting, pulling or transporting.
  • Clamping tools may only be clamped manually without using any auxiliary tools.
  • Improper use can cause personal injuries or material damage.
  • Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
  • Upper and lower section made of reinforced malleable cast iron, powder-coated
  • Hollow profile rail made of steel, cold-drawn, galvanised
  • Spindle with trapezoidal thread in rolled steel, burnished
  • Handle made of wood, water-based paint
  • Pressure plate made of steel, cold pressed, galvanised
  • Protective caps made of plastic
  • Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
  • Clean the rails with solvent
  • Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
  • Clean the fluting on the rails with a steel brush
  • Clean and oil the spindle regularly
  • If the lower part slips, turn the grub screw a 1/4 turn further (TG, KRE, KREV only)
  • Clean and oil the pressure plate regularly

Accessories

Mitre clamping system MCX
Mitre clamping system MCX
More
Edge clamp KT5
Edge clamp KT5
More