Malleable cast iron screw clamp TPN with 2‑component plastic handle
Order number | Opening | Throat depth | Rail | Weight |
mm | mm | mm | kg | |
---|---|---|---|---|
TPN16BE-2K
|
160 | 80 | 25x6 | 0.73 |
TPN20BE-2K
|
200 | 100 | 27x7 | 1.06 |
TPN25BE-2K
|
250 | 120 | 29x9 | 1.5 |
TPN40S12BE-2K
|
400 | 120 | 29x9 | 1.74 |
TPN50S12BE-2K
|
500 | 120 | 29x9 | 2 |
TPN60S12BE-2K
|
600 | 120 | 29x9 | 2.1 |
TPN80S12BE-2K
|
800 | 120 | 29x9 | 2.5 |
TP100S12BE-2K
|
1000 | 120 | 29x9 | 2.8 |
TPN30BE-2K
|
300 | 140 | 32x10 | 2.03 |
TPN40BE-2K
|
400 | 175 | 32x10 | 2.61 |
- Interior fittings
- Shell construction
- DIY
- Furniture and joinery works
- Kitchen construction and shop fitting
- Carpentry and woodwork
- Powerful and rigid clamping
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Upper and lower section made of reinforced malleable cast iron, powder-coated
- Hollow profile rail made of steel, cold-drawn, galvanised
- Spindle with trapezoidal thread in rolled steel, burnished
- Handle made of 2-component plastic
- Pressure plate made of steel, cold pressed, galvanised
- Protective caps made of plastic
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean the fluting on the rails with a steel brush
- Clean and oil the spindle regularly
- If the lower part slips, turn the grub screw a 1/4 turn further (TG, KRE, KREV only)
- Clean and oil the pressure plate regularly