Heavy duty malleable cast iron screw clamp TGKR with tried‐and‐true wooden handle
Product details
- Clamping force up to 6,500 N
- Strengthened design for higher clamping force and wider opening widths
- Ergonomically shaped wood handle
- Stable solid flat rail with serration
= Show Spareparts
| Order number | Opening | Throat depth | Rail | Weight |
| mm | mm | mm | kg | |
|---|---|---|---|---|
|
TGKR50
|
500 | 120 | 35x11 | 2.7 |
|
TGKR60
|
600 | 120 | 35x11 | 2.9 |
|
TGKR80
|
800 | 120 | 35x11 | 3.5 |
|
TGKR100
|
1000 | 120 | 35x11 | 4 |
|
TGKR125
|
1250 | 120 | 35x11 | 4.7 |
|
TGKR150
|
1500 | 120 | 35x11 | 5.2 |
|
TGKR200
|
2000 | 120 | 35x11 | 6.5 |
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Upper and lower section made of reinforced malleable cast iron, powder-coated
- Hollow profile rail made of steel, cold-drawn, galvanised
- Spindle with trapezoidal thread in rolled steel, burnished
- Handle made of wood, water-based paint
- Pressure plate made of steel, cold pressed, galvanised
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean the fluting on the rails with a steel brush
- Clean and oil the spindle regularly
- If the lower part slips, turn the grub screw a 1/4 turn further (TG, KRE, KREV only)
- Clean and oil the pressure plate regularly
