Heavy duty malleable cast iron screw clamp TGK with tried‐and‐true wooden handle
Product details
- Clamping force up to 7,000 N
- Heavy duty, reinforced design for higher clamping force and wider opening widths
- Ergonomically shaped wood handle
- Pressure plates can be replaced by hand – no tools required
- Stable profiled rail with serration
- BESSEY anti‐slip system
= Show Spareparts
| Order number | Opening | Throat depth | Rail | Weight |
| mm | mm | mm | kg | |
|---|---|---|---|---|
|
TGK40
|
400 | 120 | 35x11 | 2.48 |
|
TGK50
|
500 | 120 | 35x11 | 2.7 |
|
TGK60
|
600 | 120 | 35x11 | 3 |
|
TGK80
|
800 | 120 | 35x11 | 3.49 |
|
TGK100
|
1000 | 120 | 35x11 | 4 |
|
TGK125
|
1250 | 120 | 35x11 | 4.54 |
|
TGK150
|
1500 | 120 | 35x11 | 5.23 |
|
TGK200
|
2000 | 120 | 35x11 | 6.65 |
|
TGK250
|
2500 | 120 | 35x11 | 7.8 |
|
TGK300
|
3000 | 120 | 35x11 | 9.17 |
- Interior fittings
- Shell construction
- Furniture and joinery works
- Kitchen construction and shop fitting
- Carpentry and woodwork
- Powerful and rigid clamping
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Upper and lower section made of reinforced malleable cast iron, powder-coated
- Hollow profile rail made of steel, cold-drawn, galvanised
- Spindle with trapezoidal thread in rolled steel, burnished
- Handle made of wood, water-based paint
- Pressure plate made of steel, cold pressed, galvanised
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean the fluting on the rails with a steel brush
- Clean and oil the spindle regularly
- If the lower part slips, turn the grub screw a 1/4 turn further (TG, KRE, KREV only)
- Clean and oil the pressure plate regularly
