Deep throat screw clamp TGNT with tommy bar

Product details
  • Clamping force up to 7,000 N
  • Heavy-duty design
  • Tommy bar with rounded ends for simple transfer of force when clamping
  • Large, stable solid plain rail with fluting
  • Rail dimensions great than and equal to 40 x 11 are ungalvanized
wood
spareparts = Show Spareparts
Order number Opening Throat depth Rail Weight
mm mm mm kg
TGN30T20K spareparts
300 200 35x11 3
TGN40T20K spareparts
400 200 35x11 3.2
TGN40T25K spareparts
400 250 40x11 4.36
TGN60T25K spareparts
600 250 40x11 4.98
TGN80T25K spareparts
800 250 40x11 5.64
TGN40T30K spareparts
400 300 45x12 5.48
TGN60T30K spareparts
600 300 45x12 6.23
TGN80T30K spareparts
800 300 45x12 7.06
TGN40T40K spareparts
400 400 45x12 5.5
TGN60T40K spareparts
600 400 45x12 7.39
TGN80T40K spareparts
800 400 45x12 8.19
TGN30T50K spareparts
300 500 45x12 7.87
TGN60T50K spareparts
600 500 45x12 9.1
TGN80T50K spareparts
800 500 45x12 9.91
  • Interior fittings
  • Shell construction
  • Furniture and joinery works
  • Kitchen construction and shop fitting
  • Carpentry and woodwork
  • Powerful and rigid clamping
  • Clamping tools are not suitable for lifting, pulling or transporting.
  • Clamping tools may only be clamped manually without using any auxiliary tools.
  • Improper use can cause personal injuries or material damage.
  • Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
  • Upper and lower section made of reinforced malleable cast iron, powder-coated
  • Hollow profile rail made of steel, cold-drawn, galvanised
  • Spindle with trapezoidal thread in rolled steel, burnished
  • Toggle made of steel, galvanised
  • Pressure plate made of steel, cold pressed, galvanised
  • Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
  • Clean the rails with solvent
  • Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
  • Clean the fluting on the rails with a steel brush
  • Clean and oil the spindle regularly
  • If the lower part slips, turn the grub screw a 1/4 turn further (TG, KRE, KREV only)
  • Clean and oil the pressure plate regularly

Accessories

Edge clamp KT5
Edge clamp KT5
More
Back to product overview