Die‑cast zinc screw clamp LM
Order number | Opening | Throat depth | Rail | Weight |
mm | mm | mm | kg | |
---|---|---|---|---|
LM10/5
|
100 | 50 | 15x5 | 0.24 |
LM15/5
|
150 | 50 | 15x5 | 0.27 |
LM20/5
|
200 | 50 | 15x5 | 0.3 |
LM25/5
|
250 | 50 | 15x5 | 0.32 |
LM30/5
|
300 | 50 | 15x5 | 0.35 |
LM15/8
|
150 | 80 | 20x5 | 0.51 |
LM20/8
|
200 | 80 | 20x5 | 0.55 |
LM25/8
|
250 | 80 | 20x5 | 0.6 |
LM30/8
|
300 | 80 | 20x5 | 0.64 |
LM20/10
|
200 | 100 | 25x6 | 0.9 |
LM25/10
|
250 | 100 | 25x6 | 0.95 |
LM30/10
|
300 | 100 | 25x6 | 1.01 |
LM40/10
|
400 | 100 | 25x6 | 1.1 |
LM50/10
|
500 | 100 | 25x6 | 1.24 |
LM60/10
|
600 | 100 | 25x6 | 1.3 |
LM80/10
|
800 | 100 | 25x6 | 1.58 |
- Interior fittings
- DIY
- Furniture and joinery works
- Kitchen construction and shop fitting
- Rapid, gentle clamping
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Upper and lower section made of zinc die-cast, powder-coated
- Solid profile rail made of steel, cold-drawn, galvanised
- Spindle with trapezoidal thread in rolled steel, galvanised
- Handle made of wood, water-based paint
- Pressure plate made of steel, cold pressed, galvanised
- Protective caps made of plastic
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean the fluting on the rails with a steel brush
- Clean and oil the spindle regularly
- Clean and oil the pressure plate regularly