Earth (ground) clamp LP / TP with tried‑and true wooden handle
Order number | Opening | Throat depth | Rail | Hole Ø | Strength of current | Weight |
mm | mm | mm | mm | A | kg | |
---|---|---|---|---|---|---|
LP-1
|
150 | 60 | 20x5 | Ø10,5 | 300 | 0.5 |
TP-1
|
150 | 80 | 25x6 | Ø10,5 | 400 | 0.76 |
- Metal construction
- Locksmith work
- Car body construction
- Earthing using ground clamps
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Lower section made of zinc die-cast, galvanised
- Hollow profile rail made of steel, cold-drawn, galvanised
- Spindle with trapezoidal thread in rolled steel, burnished
- Handle made of wood, water-based paint
- Pressure plate made of steel, cold pressed, galvanised
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean the fluting on the rails with a steel brush
- Clean and oil the spindle regularly
- If the lower part slips, turn the grub screw a 1/4 turn further (TG, KRE, KREV only)
- Clean and oil the pressure plate regularly