Earth (ground) clamp LP / TP with thumb screw

Product details
  • With malleable cast iron arms
  • Practical thumb screw
  • Grounding connection hole in the upper part
  • TP‐...F‐RK: Cable strain relief at rail end / ring internal diameter 30 mm
Order number Opening Throat depth Rail Hole Ø Strength of current Weight
mm mm mm mm A kg
LP-1F 150 60 20x5 Ø10,5 300 0.53
TP-1F 150 80 25x6 Ø10,5 400 0.76
TP-2F 150 60 30x8 Ø11 600 1.12
TP-1F-RK 150 80 25x6 Ø10,5 400 0.78
TP-2F-RK 150 60 30x8 Ø11 600 1.12
  • Metal construction
  • Locksmith work
  • Car body construction
  • Earthing using ground clamps
  • Clamping tools are not suitable for lifting, pulling or transporting.
  • Clamping tools may only be clamped manually without using any auxiliary tools.
  • Improper use can cause personal injuries or material damage.
  • Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
  • Lower section made of zinc die-cast, galvanised
  • Hollow profile rail made of steel, cold-drawn, galvanised
  • Spindle with trapezoidal thread in rolled steel, burnished
  • Pressure plate made of steel, cold pressed, galvanised
  • Wing nut made of steel, powder-coated
  • Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
  • Clean the rails with solvent
  • Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
  • Clean the fluting on the rails with a steel brush
  • Clean and oil the spindle regularly
  • If the lower part slips, turn the grub screw a 1/4 turn further (TG, KRE, KREV only)
  • Clean and oil the pressure plate regularly